HLP_IN_NB:\Sto go to the STem web site.|MThis will only work if you have an Internet connection.|MThe URL is: http://www.soton.ac.uk/~sce196/stem/index.html
HLP_CO_GF:\Sedit the name of the current settings group.|MThe name can be up to 11 characters long.
HLP_CO_LB:\Sview a list of all the settings groups.
HLP_CO_NB:\Screate a new settings group.|MA maximum of %0 settings groups can be defined at once.
HLP_CO_DB:\Sdelete the current settings group.|MA minimum of 1 settings group must exist.
HLP_CO_CB:\Sclose the configuration window.|MAll unsaved changes will be lost.
HLP_CO_SV:\Ssave the current configuration.|MAll previously saved configurations will be lost.
HLP_CO_SB:\Sstart the emulator.|MThe emulator is single tasking, so save all work before starting it.|MOnce started, press F12 to quit the emulator and return to the desktop.
HLP_CO_DF:\TSTem configuration \w.
HLP_LH_0_0:\Schoose a processor.
HLP_LH_0_1:\Rchoose a processor.
HLP_RH_0_0_0:\Semulate an MC68000 microprocessor.
HLP_RH_0_0_1:The MC68000 processor is selected.
HLP_RH_0_1_0:\Semulate an MC68010 microprocessor.|MMany Atari ST programs are not compatible with this processor.|MThis is still under development, and may not work properly.
HLP_RH_0_1_1:The MC68010 processor is selected.|MMany Atari ST programs are not compatible with this processor.|MThis is still under development, and may not work properly.
HLP_RH_0_2_0:\Semulate an MC68020 microprocessor.|MMany Atari ST programs are not compatible with this processor.|MThis is still under development, and may not work properly.
HLP_RH_0_2_1:The MC68020 processor is selected.|MMany Atari ST programs are not compatible with this processor.|MThis is still under development, and may not work properly.
HLP_RH_0_3_0:
HLP_RH_0_3_1:
HLP_RH_0_4_0:
HLP_RH_0_4_1:
HLP_LH_1_0:\Schoose the size of the RAM.
HLP_LH_1_1:\Rchoose the size of the RAM.
HLP_RH_1_0_0:\Sto set the RAM size to ¼ Megabyte.
HLP_RH_1_0_1:The RAM size is set to ¼ Megabyte.
HLP_RH_1_1_0:\Sto set the RAM size to ½ Megabyte.
HLP_RH_1_1_1:The RAM size is set to ½ Megabyte.
HLP_RH_1_2_0:\Sto set the RAM size to 1 Megabyte.
HLP_RH_1_2_1:The RAM size is set to 1 Megabyte.
HLP_RH_1_3_0:\Sto set the RAM size to 2 Megabytes.
HLP_RH_1_3_1:The RAM size is set to 2 Megabytes.
HLP_RH_1_4_0:\Sto set the RAM size to 4 Megabytes.
HLP_RH_1_4_1:The RAM size is set to 4 Megabytes.
HLP_LH_2_0:\Sspecify the TOS image.
HLP_LH_2_1:\Rspecify the TOS image.
HLP_RH_2_0_0:\Senter the path of a TOS image.|MDrag a TOS image here, to automatically set it's path.|MTOS is the name given to the Atari operating system, and STem will not run without a copy of it.
HLP_RH_2_0_1:Enter the path of a TOS image.|MDrag a TOS image here, to automatically set it's path.|MTOS is the name given to the Atari operating system, and STem will not run without a copy of it.
HLP_LH_3_0:\Sspecify the source of each drive.
HLP_LH_3_1:\Rspecify the source for each drive.
HLP_RH_3_0_0:This box shows the source of floppy drive A.|M\Senter the filename of a floppy disk image, or drag an image file here.|MTo use a floppy drive enter ADFS::0.$
HLP_RH_3_0_1:This box shows the source of floppy drive A.|MEnter the filename of a floppy disk image, or drag an image file here.|MTo use a floppy drive enter ADFS::0.$
HLP_RH_3_1_0:This box shows the source of floppy drive B.|M\Senter the filename of a floppy disk image, or drag an image file here.|MTo use a floppy drive enter ADFS::0.$
HLP_RH_3_1_1:This box shows the source of floppy drive B.|MEnter the filename of a floppy disk image, or drag an image file here.|MTo use a floppy drive enter ADFS::0.$
HLP_RH_3_2_0:This box shows the source of drive C.|M\Senter the filename of a disk image, or drag an image file here.
HLP_RH_3_2_1:This box shows the source of drive C.|MEnter the filename of a disk image, or drag an image file here.
HLP_RH_3_3_0:This box shows the source of drive D.|M\Senter the filename of a disk image, or drag an image file here.
HLP_RH_3_3_1:This box shows the source of drive D.|MEnter the filename of a disk image, or drag an image file here.
HLP_RH_3_4_0:This box shows the source of drive E.|M\Senter the filename of a disk image, or drag an image file here.
HLP_RH_3_4_1:This box shows the source of drive E.|MEnter the filename of a disk image, or drag an image file here.
HLP_RH_3_5_0:This box shows the source of drive F.|M\Senter the filename of a disk image, or drag an image file here.
HLP_RH_3_5_1:This box shows the source of drive F.|MEnter the filename of a disk image, or drag an image file here.
HLP_LH_4_0:\Schoose a graphics system.
HLP_LH_4_1:\Rchoose a graphics system.
HLP_RH_4_0_0:\Senable monochrome monitor emulation.|MIn monochrome mode a resolution of 640x400 is available.
HLP_RH_4_0_1:Monochrome monitor emulation is enabled.|MIn monochrome mode a resolution of 640x400 is available.
HLP_RH_4_1_0:\Senable colour monitor emulation.|MIn colour mode resolutions of 320x200 (16 colours) and 640x200 (4 colours) are available.
HLP_RH_4_1_1:Colour monitor emulation is enabled.|MIn colour mode resolutions of 320x200 (16 colours) and 640x200 (4 colours) are available.
HLP_RH_4_2_0:\Senable enhanced monochrome monitor emulation.|MIn monochrome mode a resolution of 640x400 is available.
HLP_RH_4_2_1:Enhanced monochrome monitor emulation is enabled.|MIn monochrome mode a resolution of 640x400 is available.
HLP_RH_4_3_0:\Senable enhanced colour monitor emulation.|MIn colour mode resolutions of 320x200 (16 colours) and 640x200 (4 colours) are available.
HLP_RH_4_3_1:Enhanced colour monitor emulation is enabled.|MIn colour mode resolutions of 320x200 (16 colours) and 640x200 (4 colours) are available.
HLP_LH_5_0:\Schoose the sound system.
HLP_LH_5_1:\Rchoose the sound system.
HLP_RH_5_0_0:\Senable the production of sound using the YM2149 chip.|MThis will have no effect, since STem is unable to output any sound.
HLP_RH_5_0_1:\Sdisable the production of sound using the YM2149 chip.|MThis will have no effect, since STem is unable to output any sound.
HLP_RH_5_1_0:\Senable emulation of the STe dma chip, and it's sample playback features.|MThis will have no effect, since STem, is unable to output any sound.|MYou *must* have this option enabled when using TOS versions 1.06 or 1.62.
HLP_RH_5_1_1:\Sdisable emulation of the STe dma chip, and it's sample playback features.|MThis will have no effect, since STem, is unable to output any sound.|MYou *must* have this option enabled when using TOS versions 1.06 or 1.62.
HLP_LH_6_0:\Schoose other pieces of hardware.
HLP_LH_6_1:\Rchoose other pieces of hardware.
HLP_RH_6_0_0:\Senable blitter chip emulation.|MThe blitter chip will help to speed up graphics operations.
HLP_RH_6_0_1:\Sdisable blitter chip emulation.|MThe blitter chip will help to speed up graphics operations.
HLP_RH_6_1_0:\Senable real-time clock emulation.|MNot all versions of TOS can make use of this feature.
HLP_RH_6_1_1:\Sdisable real-time clock emulation.|MNot all versions of TOS can make use of this feature.
HLP_RH_6_2_0:\Senable the use of joysticks.|MUpto 2 joysticks can be supported at once.
HLP_RH_6_2_1:\Sdisable the use of joysticks.|MUpto 2 joysticks can be supported at once.
HLP_LH_7_0:\Schoose any other options.
HLP_LH_7_1:\Rchoose any other options.
HLP_RH_7_0_0:\Senable the debugging code.|MThis will cause a text file called 'debug' to be created when the emulator is quit.|MThis option should normally be disabled.
HLP_RH_7_0_1:\Sdisable the debugging code.|MThis will cause a text file called 'debug' to be created when the emulator is quit.|MThis option should normally be disabled.
HLP_RH_7_1_0:\Scause the screen to be saved when the emulator is quit.|MThe screen will be saved as a spritefile called 'screen' in the current directory.
HLP_RH_7_1_1:\Sprevent the screen from being saved when the emulator quits.|MThe screen will be saved as a spritefile called 'screen' in the current directory.
OPT_INT:Command options:
OPT_BTR:enables blitter chip emulation (off by default)
OPT_CLK:enables emulation of the real-time clock (off by default)
OPT_COL:sets the monitor type to ST colour (default)
OPT_DBG:enables debugging code
OPT_DMA:enables the production of sound using DMA playback (off by default)
OPT_ECL:sets the monitor type to STe colour
OPT_EMN:sets the monitor type to STe monochrome
OPT_HLP:displays this help
OPT_JOY:enables the use of joysticks (off by default)
OPT_MCR:determines which processor to emulate, where ##### can take values of 68000(default), 68010, or 68020
OPT_MON:sets the monitor type to ST monochrome
OPT_RAM:determines how many Kilobytes of RAM to provide, where #### can take values of 256, 512, 1024, 2048 or 4096
OPT_SAV:causes the screen to be saved as a sprite file when the emulator is quit (disabled by default)
OPT_YMC:enables sound production using the YM2149 chip (off by default)